Xhorse Universal Remote Key

This is a tutorial on how to disassemble the XKGHG1EN Masker Garage Remote to change frequency with Xhorse VVDI Key Tool MAX Pro. How to disassemble XKGHG1EN Garage Remote? 1.Remove the cover of remote key, tear off Xhorse logo, use a screwdriver to remove the back screw; 2.Remove the back cover and take out the PCB board of remote key. How to change XKGHG1EN Garage Remote frequency? 1.Connect the garage remote to VVDI Key Tool MAX Pro via USB cable; 2.Special function >> VVDI remote function >> Garage door key customization >> Read We can see the garage remote frequency is 315MHz. 3.Click on "315MHz" value to modify, input new frequency value to save; 4.Click on "055" value to modify, input new frequency offset KHz value to save (needs to be within the range it shows); 5.Click "Settings". Successful setup. Go back to read the Xhorse garage remote frequency again, now we can see its frequency has become 433MHz. Completed.

Xhorse XKGHG1EN Masker Garage Remote can support to set frequency, delete code, clone remote, recover data and generate remote. This article is talking about how to check delete codes status, so that we can continue to clone remote. How to check Delete Code Status? Before cloning remote, we should check the garage remote status, to make sure remote in deleted code status. 1. Deleted code status: The LED will flash once then go out quickly when keep pressing any button of the garage remote. 2. Delete code operation: 1) Press and hold "Up" & "Down" buttons at the same time, until LED light on. Keep pressing 2 buttons until the LED light off, then release the buttons; 2) Press and hold "Pause", until LED light on then off. Release the button, delete code successfully. How to do Remote Cloning? 1. Preparation work 1) Please confirm the garage remote has been in deleted code status. If not, please do above delete code operation first. 2)Make sure the garag...